Alpha A65 Tiny Whoop – RTF Combo IFlight
CHF 269.99 Add to cart

Alpha A65 Tiny Whoop – RTF Combo IFlight

CHF 269.99

Available on backorder

Order before 11.30am for same day dispatch

  • 30 days easy returns
Guaranteed Safe Checkout

Alpha A65 Tiny Whoop – RTF Combo IFlight

PRODUCT DESCRIPTION

Let’s welcome the iFlight Alpha series, a new way to fly FPV. This Alpha A65 is an even smaller size 65mm light weight 24.5g whoop. Stuffed with our newest electronic components and technology, this thing will guarantee loads of hours practice or racing across the smallest spaces. This is what we came up with to combine flight time efficiency with sufficient power.

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

FEATURES:

  • 24.5 grams (without battery)
  • Butter smooth XING 0802 22000KV (more torque and efficiency with longer flight times)
  • Ducts to protect the sensitive environment or yourself
  • Pre-tuned with smooth cinematic settings

Alpha A65 w/800TVL  150° camera BNF Specs:

  • SucceX F4 1S 5A AIO Whoop Board  w/VTX
  • XING 0802 22000KV FPV Micro Motor
  • Wheelbase: 65mm
  • Body size: 46*46mm
  • Ducted propeller size: 31mm
  • FC pattern: 25.5*25.5mm
  • Weight: 24.5g (without battery)
  • Flight time: 3-4 min cruising (1S 300mAh)

PRE-TUNED & PRE-SETUP:

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

Alpha A65 w/800TVL 150° Camera Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Alpha 65mm Frame
  • 1x 800TVL 150° Camera
  • 1x SucceX F4 1S 5A AIO Whoop Board (MPU6000) w/VTX
  • 1x Whip antenna
  • 2sets HQ 31mmx3 1mm (Set of 4 – Color May Vary)

FC // SucceX F4 1S 5A AIO Whoop Board

Size:29*29mm

Mounting pattern: 25.5*25.5mm/φ3mm (half-hole)

Connector:Micro-USB

Weight: 5.4g (with power cable, vtx, and vtx antenna)

MCU:STM32F411

Gyro:MPU6000

Blackbox:no

BEC output:5V 1.2A

INA pad:n uart2

Barometer:no

FC Firmware:MatekF411RX

ESC Firmware:O-H-05 BLS

ESC // 5A 

Current: 5A continuous and peak 6A

Current scale: 400

Input:1S

Signal Support: Dshot,Oneshot,Multishot

Current sensor:yes

BLHeli:BLHeli-S

ESC Telemetry:no

FPV cam: 

Power DC: 5V

Size: 14*12.2*12mm

Net weight: 1.6g

800TVL 150°

VTX:

Input voltage: 5V

Channels: 48CH

Power: PIT/25/50mW

Connector:UFL/IPEX

iF8 FPV Remote Controller

Size: 160*130*45mm

Weight: 233g

Frequency: 2.400GHZ-2.480GHZ

RF Module: Multi-Protocol Module Compatible (CC2500)

Protocol Options: D8 / D16 v1 FCC / D16 v1 LBT / D16 v2 FCC / D16 v2 LBT (No Frsky ACCESS support)

Max. Tansmission Power: 20dB

Antenna gain: 2dBi

Range: 1~2km @ 20dB (depending on noise floor and RX)

Battery: Built in 3.7V 1000mAh Lithium battery

Charging: Built in USB-C charging

Firmware: OpenTX iF8 Edition (Special iF8 Edition)

Multiprotocol-TX-Module(Stick input protocol selection)

Channels: Up to 8 channels (depending on the model / receiver)

 

Compatibility

 All D8 and D16 compatible receivers!

– Frsky ACCST protocol (no ACCESS protocol supported)

 iF8 D8RX Receiver (LINK)

– iF16 Receiver

iFlight FPV Goggles with DVR Function

Frequency: 40CH 5.8GHz

Built-in battery: 3.7V/2000mAh Battery

Size: 155*144*113mm

Weight: 295g with 3.7V 2000mAh battery

Headband: 3-Sided Adjustable Headband

Screen size: 4.3 Inch

Resolution: 800*480 (no blur after enlarge by the lens)

Brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV

TF card: support up to 32G

 

Main Feature:

With DVR function video recording, picture saving

High brightness 4.3 inch LCD specially turned for FPV racing or Model airplane.

Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand includes race frequency.

Come with advanced auto-searching function ad show you the working frequency on screen.

Built-in 3.7V/2000mAh battery, each full charge revive around 3.5 hours working time. 3.5 hours working time.

Ergonomic design fit your faces.

92% transparent lens adopted, no distort, no blur on the adage of screen;

Light weight 295g with 3hr 2000mAh battery, RTF for any scale, racing, Model airplane game.

4.3 inch 480*272px HD high brightness LCD.

R81 Receiver

  • Frequency: 2400-2483.5Mhz
  • Dimension: 17*11mm
  • Weight: 2g
  • Numbers of Channel: 8
  • Signal form: D8
  • Output Formal: SBUS inverted / output RSSI
  • Operating Voltage: 4.5-6V
  • Antanna Length: 9cm

Fullsend 1S HV 300mAh 40C Lipo Batteray-PH2.0 (5pcs)

-Minimum Capacity: 300mAh

-Configuration: JST-PH2.0 /HV4.35V/3.8V/1.14WH

-Discharge Rate: 40C

-Max Burst Discharge Rate: 60C

-Net Weight: 8.1g

-Dimensions: 65*11*6mm

-Charge Plug: JST-PH2.0

Caution:

*Don’t over-charge or over-discharge batteries.

*Don’t put it beside the high-temperature condition.

*Don’t throw it into the fire.

*Don’t throw it into the water.

1S JST PH2.0 Type-C Battery Charger:

ONLY support LiHV 3.8V/4.35V 1S battery, not for 4.20V 1S LiPo battery

Support 0.2A/0.6A charge current by switch button

TYPE-C power supply interface input range: 5V plusmn; 5% on 0.5~2A, suggested 2.4A

Charger plug: JST-PH 2.0

The LED light indicate the charging state, LED on red solid indicates charging, LED on green indicates full charged.

Battery charging termination voltage:LiPo type 4.35V plusmn; 0.5%

Product weight: 1.6g

Additional information

Weight0.6 kg
Dimensions10 × 15 × 10 cm
Receiver option

Flysky XR602T-A(FCC), PNP

Reviews

There are no reviews yet.

Be the first to review “Alpha A65 Tiny Whoop – RTF Combo IFlight”

Your email address will not be published. Required fields are marked *