Alpha A65 Tiny Whoop – RTF Combo IFlight
Let’s welcome the iFlight Alpha series, a new way to fly FPV. This Alpha A65 is an even smaller size 65mm light weight 24.5g whoop. Stuffed with our newest electronic components and technology, this thing will guarantee loads of hours practice or racing across the smallest spaces. This is what we came up with to combine flight time efficiency with sufficient power.
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
- 24.5 grams (without battery)
- Butter smooth XING 0802 22000KV (more torque and efficiency with longer flight times)
- Ducts to protect the sensitive environment or yourself
- Pre-tuned with smooth cinematic settings
Alpha A65 w/800TVL 150° camera BNF Specs:
- SucceX F4 1S 5A AIO Whoop Board w/VTX
- XING 0802 22000KV FPV Micro Motor
- Wheelbase: 65mm
- Body size: 46*46mm
- Ducted propeller size: 31mm
- FC pattern: 25.5*25.5mm
- Weight: 24.5g (without battery)
- Flight time: 3-4 min cruising (1S 300mAh)
PRE-TUNED & PRE-SETUP:
– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”
– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”
Alpha A65 w/800TVL 150° Camera Quad BNF Included Components and Parts
- Prebuilt and tested Quadcopter
- 1x Alpha 65mm Frame
- 1x 800TVL 150° Camera
- 1x SucceX F4 1S 5A AIO Whoop Board (MPU6000) w/VTX
- 1x Whip antenna
- 2sets HQ 31mmx3 1mm (Set of 4 – Color May Vary)
FC // SucceX F4 1S 5A AIO Whoop Board
Mounting pattern: 25.5*25.5mm/φ3mm （half-hole)
Weight: 5.4g (with power cable, vtx, and vtx antenna)
BEC output：5V 1.2A
INA pad：n uart2
ESC Firmware：O-H-05 BLS
ESC // 5A
Current: 5A continuous and peak 6A
Current scale: 400
Signal Support: Dshot，Oneshot，Multishot
Power DC: 5V
Net weight: 1.6g
Input voltage: 5V
iF8 FPV Remote Controller
RF Module: Multi-Protocol Module Compatible (CC2500）
Protocol Options: D8 / D16 v1 FCC / D16 v1 LBT / D16 v2 FCC / D16 v2 LBT (No Frsky ACCESS support)
Max. Tansmission Power: 20dB
Antenna gain: 2dBi
Range: 1~2km @ 20dB (depending on noise ﬂoor and RX)
Battery: Built in 3.7V 1000mAh Lithium battery
Charging: Built in USB-C charging
Firmware: OpenTX iF8 Edition (Special iF8 Edition)
Multiprotocol-TX-Module（Stick input protocol selection）
Channels: Up to 8 channels (depending on the model / receiver)
– All D8 and D16 compatible receivers!
– Frsky ACCST protocol (no ACCESS protocol supported)
– iF16 Receiver
iFlight FPV Goggles with DVR Function
Frequency: 40CH 5.8GHz
Built-in battery: 3.7V/2000mAh Battery
Weight: 295g with 3.7V 2000mAh battery
Headband: 3-Sided Adjustable Headband
Screen size: 4.3 Inch
Resolution: 800*480 (no blur after enlarge by the lens)
Brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
TF card: support up to 32G
With DVR function video recording, picture saving
High brightness 4.3 inch LCD specially turned for FPV racing or Model airplane.
Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand includes race frequency.
Come with advanced auto-searching function ad show you the working frequency on screen.
Built-in 3.7V/2000mAh battery, each full charge revive around 3.5 hours working time. 3.5 hours working time.
Ergonomic design fit your faces.
92% transparent lens adopted, no distort, no blur on the adage of screen;
Light weight 295g with 3hr 2000mAh battery, RTF for any scale, racing, Model airplane game.
4.3 inch 480*272px HD high brightness LCD.
- Frequency: 2400-2483.5Mhz
- Dimension: 17*11mm
- Weight: 2g
- Numbers of Channel: 8
- Signal form: D8
- Output Formal: SBUS inverted / output RSSI
- Operating Voltage: 4.5-6V
- Antanna Length: 9cm
Fullsend 1S HV 300mAh 40C Lipo Batteray-PH2.0 (5pcs)
-Minimum Capacity: 300mAh
-Configuration: JST-PH2.0 /HV4.35V/3.8V/1.14WH
-Discharge Rate: 40C
-Max Burst Discharge Rate: 60C
-Net Weight: 8.1g
-Charge Plug: JST-PH2.0
*Don’t over-charge or over-discharge batteries.
*Don’t put it beside the high-temperature condition.
*Don’t throw it into the fire.
*Don’t throw it into the water.
1S JST PH2.0 Type-C Battery Charger:
ONLY support LiHV 3.8V/4.35V 1S battery, not for 4.20V 1S LiPo battery
Support 0.2A/0.6A charge current by switch button
TYPE-C power supply interface input range: 5V plusmn; 5% on 0.5~2A, suggested 2.4A
Charger plug: JST-PH 2.0
The LED light indicate the charging state, LED on red solid indicates charging, LED on green indicates full charged.
Battery charging termination voltage:LiPo type 4.35V plusmn; 0.5%
Product weight: 1.6g